LuthierTube.com - Most Viewed Videos http://luthiertube.com http://luthiertube.com/images/plaery-logo.jpg http://luthiertube.com LuthierTube.com - Most Viewed Videos Ultimate Video Sharing Luthier Site Where the master share their work on video cumpiano 5- Truing the scarf faces: refining the planed sur http://luthiertube.com/video/R2MOGGR9HU1W/5-Truing-the-scarf-faces-refining-the-planed-surfaces-on-a-sanding-board 5- Truing the scarf faces: refining the planed surfaces on a sanding board
The planed scarf faces are stroked on a sanding board until the sandpaper’s texture appears on their entire surface. I first sand on a 80 grit surface, then I flip it over to sand on a 100 grit surface. Rating 0/10
Views 1720
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/R2MOGGR9HU1W/5-Truing-the-scarf-faces-refining-the-planed-surfaces-on-a-sanding-board 2010-11-14 20:43:12 5- Truing the scarf faces: refining the planed sur neck blank cumpiano slstexas Strawberry Cream Cedar / Cherry flat top http://luthiertube.com/video/1ONA94USOYG2/Strawberry-Cream-Cedar-Cherry-flat-top Strawberry Cream Cedar / Cherry flat top
One of my recent Forum builds. May be the first guitar from this cedar log. I like it ! Rating 0/10
Views 1324
Duration 06:18
]]> Playing ,Steel String http://luthiertube.com/video/1ONA94USOYG2/Strawberry-Cream-Cedar-Cherry-flat-top 2010-11-20 13:59:50 Strawberry Cream Cedar / Cherry flat top Guitar - Cedar Flat top slstexas Greg Nelson Fret board radius jig http://luthiertube.com/video/1574M15NHSSX/Fret-board-radius-jig Fret board radius jig
A tool to make the initial radius on a fret board. Rating 0/10
Views 1062
Duration 07:56
]]> Classical Guitar,Luthier Teaching,Playing http://luthiertube.com/video/1574M15NHSSX/Fret-board-radius-jig 2011-04-02 14:41:39 Fret board radius jig fret board radius, radius fret board Greg Nelson cumpiano 1- Measuring and marking the neck shaft billet for http://luthiertube.com/video/H4XMUHUGO26H/1-Measuring-and-marking-the-neck-shaft-billet-for-the-first-scarf-cut 1- Measuring and marking the neck shaft billet for the first scarf cut
Mark 7" from one end of a 24" x 3" billet. With a protractor, mark a 15-degree line inclined back towards the start of the billet Rating 0/10
Views 956
Duration 00:01
]]> Steel String http://luthiertube.com/video/H4XMUHUGO26H/1-Measuring-and-marking-the-neck-shaft-billet-for-the-first-scarf-cut 2010-11-14 09:51:27 1- Measuring and marking the neck shaft billet for neck blank cumpiano cumpiano 4- Truing the scarf faces: leveling with a block p http://luthiertube.com/video/SSNBM2G53AWU/4-Truing-the-scarf-faces-leveling-with-a-block-plane 4- Truing the scarf faces: leveling with a block plane
adf Rating 0/10
Views 903
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/SSNBM2G53AWU/4-Truing-the-scarf-faces-leveling-with-a-block-plane 2010-11-14 16:55:47 4- Truing the scarf faces: leveling with a block p asdf cumpiano Greg Nelson Tuning the tone bars http://luthiertube.com/video/2XM5D17X3DWG/Tuning-the-tone-bars Tuning the tone bars
tap tuning and carving the tone bars Rating 9/10
Views 900
Duration 20:55
]]> Luthier Teaching,Steel String http://luthiertube.com/video/2XM5D17X3DWG/Tuning-the-tone-bars 2011-01-16 11:36:18 Tuning the tone bars brace, tone bar, guitar, building Greg Nelson cumpiano 10- Adjust the neckblank fixture and headblock seg http://luthiertube.com/video/A7BA2XOR82NO/10-Adjust-the-neckblank-fixture-and-headblock-segments 10- Adjust the neckblank fixture and headblock segments
Align the headstock/neckshaft segments and the two neckblank fixture blocks so they accurately coincide. Rating 0/10
Views 857
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/A7BA2XOR82NO/10-Adjust-the-neckblank-fixture-and-headblock-segments 2010-11-17 11:28:38 10- Adjust the neckblank fixture and headblock seg neck blank cumpiano cumpiano 9- Introducing the neckblank scarf fixture http://luthiertube.com/video/34NAXY3D1GRW/9-Introducing-the-neckblank-scarf-fixture 9- Introducing the neckblank scarf fixture
The Scarf fixture consists of a rectangular piece of plywood or hardwood with a corner cut off at 15 degrees to match the scarf, and with two small block screwed to its surface--one fixed to it with two screws and one screwed at one end, allowing it to pivot as shown. Rating 0/10
Views 837
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/34NAXY3D1GRW/9-Introducing-the-neckblank-scarf-fixture 2010-11-15 14:36:28 9- Introducing the neckblank scarf fixture neck blank cumpiano cumpiano 2- Making the scarf cut on the bandsaw http://luthiertube.com/video/93X57MBHO949/2-Making-the-scarf-cut-on-the-bandsaw 2- Making the scarf cut on the bandsaw
Supporting the billet with a squared block, saw down the angled line on the billet edge with a bandsaw. The bandsaw blade should be well squared, not only from side to side, but also the blade tips should be vertically squared to the table as well. Rating 0/10
Views 824
Duration 00:01
]]> Steel String http://luthiertube.com/video/93X57MBHO949/2-Making-the-scarf-cut-on-the-bandsaw 2010-11-14 10:14:22 2- Making the scarf cut on the bandsaw neck blank cumpiano cumpiano 7- Reduce the headstock to 1/2-inch http://luthiertube.com/video/M79WND47UMD1/7-Reduce-the-headstock-to-12-inch 7- Reduce the headstock to 1/2-inch
On a well-squared bandsaw, reduce the headstock segment to 1/2-inch thickness. Rating 0/10
Views 786
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/M79WND47UMD1/7-Reduce-the-headstock-to-12-inch 2010-11-17 12:44:16 7- Reduce the headstock to 1/2-inch neck blank cumpiano slstexas Hand Plane Level http://luthiertube.com/video/WUA9ANAAHU77/Hand-Plane-Level- Hand Plane Level
Getting ready for drum sander Rating 0/10
Views 773
Duration 04:35
]]> Luthier Teaching http://luthiertube.com/video/WUA9ANAAHU77/Hand-Plane-Level- 2010-11-29 14:31:03 Hand Plane Level All Cedar Arch Top slstexas Greg Nelson Side bending with a Fox style press http://luthiertube.com/video/8UN2SG19GOGK/Side-bending-with-a-Fox-style-press Side bending with a Fox style press
I use a Fox style press to bend some sides Rating 0/10
Views 744
Duration 15:18
]]> Luthier Teaching,Steel String http://luthiertube.com/video/8UN2SG19GOGK/Side-bending-with-a-Fox-style-press 2010-11-14 21:16:26 Side bending with a Fox style press Greg Nelson Greg Nelson cumpiano 6- Separate the neck shaft segments http://luthiertube.com/video/KMDD57S5SDD4/6-Separate-the-neck-shaft-segments 6- Separate the neck shaft segments
Simply pop the two segments loose with a couple of sharp raps from a hammer. Rating 0/10
Views 741
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/KMDD57S5SDD4/6-Separate-the-neck-shaft-segments 2010-11-15 13:50:22 6- Separate the neck shaft segments neck blank cumpiano cumpiano 8-Scrub the bandsaw marks from the headstock segme http://luthiertube.com/video/OSGS6OSDD6RY/8-Scrub-the-bandsaw-marks-from-the-headstock-segment 8-Scrub the bandsaw marks from the headstock segment
Several strokes of the recently-resawn face of the headstock segment on the sanding board will remove its blade marks. Rating 0/10
Views 741
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/OSGS6OSDD6RY/8-Scrub-the-bandsaw-marks-from-the-headstock-segment 2010-11-17 14:31:38 8-Scrub the bandsaw marks from the headstock segme neck blank cumpiano Greg Nelson Banjo comes alive http://luthiertube.com/video/A4UGGAX8311W/Banjo-comes-alive Banjo comes alive
First note struck on new banjo Rating 0/10
Views 731
Duration 00:44
]]> Luthier Teaching http://luthiertube.com/video/A4UGGAX8311W/Banjo-comes-alive 2011-01-29 19:50:50 Banjo comes alive banjo, Gilbert, first note Greg Nelson Greg Nelson Making the fret board Just The Facts http://luthiertube.com/video/S71RSU93M9D1/Making-the-fret-board-Just-The-Facts Making the fret board Just The Facts
Making the fret board edited version Rating 0/10
Views 659
Duration 21:28
]]> Luthier Teaching,Steel String http://luthiertube.com/video/S71RSU93M9D1/Making-the-fret-board-Just-The-Facts 2011-09-15 22:19:57 Making the fret board Just The Facts Making the fret board JTF, nelson guitar, nelsons guitars Greg Nelson slstexas Coco Cedar / Walnut - For Drew http://luthiertube.com/video/H3124HXWAYUN/Coco-Cedar-Walnut-For-Drew Coco Cedar / Walnut - For Drew
This guitar will be going to the Boston area next week. I wanted to get some sound clips before the guitar is gone. Rating 0/10
Views 656
Duration 02:51
]]> Playing ,Steel String http://luthiertube.com/video/H3124HXWAYUN/Coco-Cedar-Walnut-For-Drew 2010-11-20 14:23:42 Coco Cedar / Walnut - For Drew Coco Cedar, Claro Walnut slstexas cumpiano Fitting the truss rod cap strip http://luthiertube.com/video/7S3M9YKUR6MM/Fitting-the-truss-rod-cap-strip Fitting the truss rod cap strip
Fitting the truss rod cap strip Rating 0/10
Views 634
Duration 02:37
]]> Luthier Teaching http://luthiertube.com/video/7S3M9YKUR6MM/Fitting-the-truss-rod-cap-strip 2011-01-22 16:49:23 Fitting the truss rod cap strip neck blank cumpiano cumpiano 3- Tacking down the headstock segment http://luthiertube.com/video/M7K6A514WSX9/3-Tacking-down-the-headstock-segment 3- Tacking down the headstock segment
The shorter headstock segment is tacked to the longer with tiny drops of white glue, in such a way that the angled faces are as continuous as possible. Align the two pieces accurately and clamp together for 10-15 minutes. Rating 0/10
Views 630
Duration 00:01
]]> Luthier Teaching http://luthiertube.com/video/M7K6A514WSX9/3-Tacking-down-the-headstock-segment 2010-11-14 15:58:01 3- Tacking down the headstock segment neck blank cumpiano mario kermodie gold HD http://luthiertube.com/video/7KM4X79AUASU/-kermodie-gold-HD kermodie gold HD
kermodie gold HD Lutz Spruce Rating 0/10
Views 626
Duration 00:01
]]> Harvesting / Logging http://luthiertube.com/video/7KM4X79AUASU/-kermodie-gold-HD 2010-11-14 04:10:01 kermodie gold HD redo the kermodie gold HD mario